TELEFIRE TFEVS-1300

The TELEFIRE TFEVS-1300 is a compact and reliable voice evacuation control panel, specifically designed for the fire safety and general public address needs of small to medium-sized facilities. The device provides 40W output power for 100V speaker systems, enabling the transmission of clear and intelligible emergency messages as well as general announcements. Its built-in microSD card reader also allows for the playback of pre-recorded voice messages.

Key Features

• Output Power: 40W RMS, with Class-D amplifier.
• Speaker Output: Interfaces with 100V systems.
• Message Handling: MicroSD card support for pre-recorded emergency and informational messages.
• Inputs: Two microphone inputs (MIC1, MIC2) and one RCA music input.
• Display and Control: LCD display for system status and fault indication, and a master volume control.
• Fault Indication: Built-in fault relay output (NC/COM/NO) for connection to monitoring systems.
• Standard Compliance: Meets the requirements of NFPA and SI 1220 standards.
• Power Supply: 230V AC mains power, with the option for 12V DC (e.g., with a 7Ah battery) backup.

Technical Specifications

• Output Power: 40W RMS.
• Output Voltage: 100V.
• Frequency Response: 800Hz – .8KHz (-3dB).
• Power Supply: 230V AC, 50Hz; or 12V DC.
• Current Consumption (230V AC, quiescent): Approx. 170mA.
• Battery: Supported e.g., 12V 7Ah (battery capacity should be selected according to local regulations and system requirements).
• Microphone Input Sensitivity: 480mV (at 35dB signal-to-noise ratio).
• Music Input Maximum Level: .5Vmax.
• Dimensions (W x H x D): 370 x 300 x 95 mm.
• Weight: 3 kg.
• Operating Temperature: 0°C – 50°C.
• Relative Humidity: 10-90% (non-condensing).

Application Areas

• Public address for small to medium-sized buildings (e.g., schools, office buildings, shops).
• As part of emergency evacuation systems, integrated with fire alarm control panels.
• Broadcasting general announcements and background music.

Installation and Configuration

The TFEVS-1300 is designed for wall mounting. It can be easily connected to 100V speakers, microphones, and other audio sources. Pre-recorded messages can be uploaded and configured via a microSD card. The built-in fault relay allows for remote monitoring of the system status. It can be integrated with TELEFIRE fire alarm control panels via ADR-723 or ADR-741 modules.

Compatible Products and Systems

• TELEFIRE ADR-723 addressable output module
• TELEFIRE ADR-741 addressable relay module
• TELEFIRE TFVB-500 audio booster (if higher power is needed within a zone)
• 100V speakers
• Microphones (for MIC1, MIC2 inputs)
• Audio players with RCA connection (for Music input)